SN-CEN/TS 16980-1:2016 PDF

SN-CEN/TS 16980-1:2016 PDF

Name:
SN-CEN/TS 16980-1:2016 PDF

Published Date:
12/07/2016

Status:
Active

Description:

Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials

Publisher:
Standards Norway SN-CEN/TS Series

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
Need Help?
ADOPTED_FROM:CEN/TS 16980-1:2016 This standard describes a method for assessing the performance of photocatalytic inorganic materials contained in cement mortars and/or limes or ceramic-based matrices, paints or materials deposited as thin films or coatings on a variety of substrates for the photocatalytic abatement of nitric oxide in the gas phase. This method is not suitable for the assessment of samples to be applied with flow perpendicular to the surface or flow permeating the surface itself as polymeric and paper filters, honeycomb structures and suchlike. The performance for the photocatalytic sample under test is evaluated by measuring the degradation rate of nitric oxide (NO) using the method described herein. The photocatalytic abatement rate is calculated from the observed rate by eliminating the effects of mass transfer. The intrinsic photocatalytic abatement rate is an intrinsic property of the material tested and makes it possible to distinguish the photocatalytic activities of various products with an absolute scale defined with physical and engineering meaning. For the measurements and calculations described in this standard the concentration of nitrogen oxides (NOx) is defined as the stoichiometric sum of nitric oxide (NO) and nitrogen dioxide (NO2). Safety statement Persons using this document should be familiar with the normal laboratory practice, if applicable. This document cannot address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. Environmental statement It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to better alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard will take care to carry out an appropriate disposal of the wastes, according to local regulation.
Number of Pages : 28
Published : 12/07/2016

History

SN-CEN/TS 16980-1:2016
Published Date: 12/07/2016
Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials

Related products


Best-Selling Products

DIN/TS 1187-2 - DRAFT
Published Date: 01/01/2024
Draft Document - Unplasticized polyvinyl chloride (PVC-U) drainpipes - Part 2: Guidance for the assessment of conformity
$9.156
DIN/TS 1187-2
Published Date: 07/01/2024
Unplasticized polyvinyl chloride (PVC-U) drainpipes - Part 2: Guidance for the assessment of conformity
$9.156
DIN/TS 13283
Published Date: 09/01/2023
Biotechnology - Biobanking - Requirements for sample certificates for biological material and associated data; Text in German and English
$14.388
DIN/TS 14530-29
Published Date: 10/01/2022
Fire-fighting vehicles - Part 29: Supplementary requirements for pump water tankers for vegetation fire-fighting TLF 2000-V, TLF 3000-V, TLF 4000-V
$16.023
DIN/TS 16961-3
Published Date: 08/01/2024
Thermoplastic pipes and fittings with profiled wall and smooth pipe inside - Part 3: Assessment of conformity; Text in German and English
$22.563
DIN/TS 18004
Published Date: 10/01/2022
Use of building products in construction works - Test methods for aggregates for concrete according to DIN 1045-2
$16.023